KW Coilover Suspensions

Function:

• Infinitely adjustable within German TUEV-tested adjustment parameters
• Shortened struts for increased spring travel
• Trapezoidal threads for simple height adjustment
• Three different damping technologies for individual adjustment
• Elastomer bump stops with integrated dust boot protection
• Easy to read documentation
• Ready to use comprehensive solutions
• Visually perfect, safe and unique motion dynamics

• Strut housings in inox-line stainless steel technology
• Anodized aluminum spring collars and add-on pieces
• High-quality, high-tensile racing springs
• Special ventilation and sealing system
• High-quality damping components
• Hardened, chromium-plated piston rods
• Special guide and sealing systems
• Pistons with V-shaped Teflon seals - optimal sealing with minimal friction - temperature-resistant, durable damping technology

1). Height adjustable on the front and rear axles (threaded strut housings)
2). Height adjustable on the front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)
3). Only height adjustable on the front axle (threaded strut housings front axle) springs + dampers on the rear axle
6). When using original tires, wheel offset spacers may be required
8). Not for vehicles with automatic level control
10). In Variant 2, rebound adjustment also at the front-axle can only be performed when NOT installed on the vehicle.
14). Only for vehicles with ESP (Electronic Stability Program)
57). Only for cars with a clamp diameter of 54.6 mm (2.14") on the front axle
58). Only for cars with a clamp diameter of 49.8 mm (1.96") on the front axle
85). We recommend to use our adjustable lower KW transverse control arm to adjust the camber at the rear axle. Part-no. 68510061 - Call for pricing.

2

2

1). Height adjustable on the front and rear axles (threaded strut housings)
2). Height adjustable on the front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers)
6). When using original tires, wheel offset spacers may be required
8). Not for vehicles with automatic level control
17). All vehicles manufactured before 6/92 require dome bearings (BMW part-no.: dome bearing 31 331 092 885 + washer 31 331 116 983 + collar 331 110 196).
19). Additional front axle assembly parts for vehicles with EDC (Electronic Damper Control) are required from the automobile manufacturer: For the front-axle: BMW part-no.: dome bearing 31 331 091 709 + washer 31 331 116 983 + sealing washer 31 331 110 196. For the rear axle: BMW part-no.: supporting bearing: 33 521 091 710 + supporting pot 33 521 090 282 + washer 33 521 092 986 + tubular cable protection 31 331 137 932 + bump stop 33 531 091 031
33). At Variant 2 rear axle damper with adjustable compression and rebound dampening
42). Rear sport shock absorbers and adjustable height sensor link are supplied. The factory pneumatic spring is retained.